File needed
1.Odin V3.09
2. Usb driver samsung
3. Firmware samsung
Download all the files above, then extract.
Odin run
Tick Auto reboot and F.reset time, the picture above.
Prepare samsung G313H, then press, key on, volume down, the same menu together, image below
Then press the volume up, to exit download mode, the picture below,
Then the USB cable plugs into your computer, to exit the picture id com (blue) image below
In the column ap Fill with firmware that has been extracted earlier with tar format md5
then click the star button and the flashing process will be concluded by writing Passed out, meaning that it is ok, but if it says FAILED red color, means fail and need to be repeated again, the flashing process is approximately 10 minutes.
1.Odin V3.09
2. Usb driver samsung
3. Firmware samsung
Download all the files above, then extract.
Odin run
Tick Auto reboot and F.reset time, the picture above.
Prepare samsung G313H, then press, key on, volume down, the same menu together, image below
Then press the volume up, to exit download mode, the picture below,
Then the USB cable plugs into your computer, to exit the picture id com (blue) image below
In the column ap Fill with firmware that has been extracted earlier with tar format md5
then click the star button and the flashing process will be concluded by writing Passed out, meaning that it is ok, but if it says FAILED red color, means fail and need to be repeated again, the flashing process is approximately 10 minutes.
0 comments:
Post a Comment