The type and the path lcd nokia 206 is slightly different, but if we look at the scheme and driver ic lights are almost no different from the Nokia others who use transistors and diodes, which if transistor die and diode die, we do not have to replace quite a trick modif own guaranteed will work 100%.
Of course the trick is to be careful to execute because it must dismantle the lcd, but if we have become accustomed, I do not think it problem.Oke let's go directly to the problem. we have done is to dismantle lcd first, here we use quite 2 lamp lcd.
The top image is a lamp lcd after unloading to the position as shown below
Lcd dislodged point No. 2 and 3 No. 1 and 4 do not have the dislodged still attached to the solder point, then the above point No. 2 and 3 in love isolatip with the aim not stuck with solder.
Once you jumper as shown above and then plug and turn on the phone and then, when the flame is still not doing the trick a second jumper section transistor
Discard V2401 and V2400 then jumper, bottom image
Get it right and proper as shown above will work 100%, if still confused just comment ......................... ???????? ?????????